What is precession?

$A$ wheel of moment of inertia $2 \ kg \ m^2$ is rotating about an axis passing through its centre and perpendicular to its plane at a speed of $60 \ rad \ s^{-1}$. Due to friction, it comes to rest in $5$ minutes. The angular momentum of the wheel three minutes before it stops rotating is:

$A$ pendulum consists of a bob of mass $m=0.1 \ kg$ and a massless inextensible string of length $L=1.0 \ m$. It is suspended from a fixed point at height $H=0.9 \ m$ above a frictionless horizontal floor. Initially,the bob of the pendulum is lying on the floor at rest vertically below the point of suspension. $A$ horizontal impulse $P=0.2 \ kg \cdot m/s$ is imparted to the bob at some instant. After the bob slides for some distance,the string becomes taut and the bob lifts off the floor. The magnitude of the angular momentum of the pendulum about the point of suspension just before the bob lifts off is $J \ kg \cdot m^2/s$. The kinetic energy of the pendulum just after the lift-off is $K$ Joules. $(1)$ The value of $J$ is. . . . . . $(2)$ The value of $K$ is. . . . . Give the answers of the questions $(1)$ and $(2)$.

$A$ uniform rod $AB$ of mass $m$ and length $l$ is at rest on a smooth horizontal surface. An impulse $J$ is applied to the end $B$,perpendicular to the rod in the horizontal direction. Find the speed of particle $P$ at a distance $\frac{l}{6}$ from the centre towards $A$ of the rod after time $t = \frac{\pi m l}{12 J}$.

$A$ uniform sphere of mass $m$ and radius $R$ is placed on a rough horizontal surface. The sphere is struck horizontally at a height $h$ from the floor. Match the following:

$(a)$ $h = \frac{R}{2}$	$(i)$ Sphere rolls without slipping with a constant velocity and no loss of energy.
$(b)$ $h = R$	$(ii)$ Sphere spins clockwise,loses energy by friction.
$(c)$ $h = \frac{3R}{2}$	$(iii)$ Sphere spins anti-clockwise,loses energy by friction.
$(d)$ $h = \frac{7R}{5}$	$(iv)$ Sphere has only a translational motion,loses energy by friction.

$A$ yo-yo is resting on a rough horizontal table. Forces $F_1, F_2$ and $F_3$ are applied separately as shown. The correct statement is